Termination w.r.t. Q proof of TRS/TRCSRExIntrod_Zan97

Termination w.r.t. Q of the following Term Rewriting System could not be shown:

Q restricted rewrite system:
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.

↳ QTRS

  ↳ DependencyPairsProof

Q restricted rewrite system:
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.

Using Dependency Pairs [1,13] we result in the following initial DP problem:
Q DP problem:
The TRS P consists of the following rules:

P₁(mark₁(X)) -> P₁(X)
ACTIVE₁(zero₁(X)) -> ZERO₁(active₁(X))
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
S₁(mark₁(X)) -> S₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(if₃(X1, X2, X3)) -> IF₃(active₁(X1), X2, X3)
TOP₁(mark₁(X)) -> TOP₁(proper₁(X))
PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)
ZERO₁(mark₁(X)) -> ZERO₁(X)
IF₃(mark₁(X1), X2, X3) -> IF₃(X1, X2, X3)
PROD₂(ok₁(X1), ok₁(X2)) -> PROD₂(X1, X2)
ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X2)
FACT₁(mark₁(X)) -> FACT₁(X)
PROPER₁(zero₁(X)) -> PROPER₁(X)
P₁(ok₁(X)) -> P₁(X)
ACTIVE₁(add₂(X1, X2)) -> ADD₂(active₁(X1), X2)
ACTIVE₁(fact₁(X)) -> FACT₁(p₁(X))
TOP₁(ok₁(X)) -> ACTIVE₁(X)
ACTIVE₁(prod₂(s₁(X), Y)) -> ADD₂(Y, prod₂(X, Y))
ACTIVE₁(s₁(X)) -> S₁(active₁(X))
ACTIVE₁(add₂(X1, X2)) -> ADD₂(X1, active₁(X2))
PROPER₁(s₁(X)) -> PROPER₁(X)
ACTIVE₁(fact₁(X)) -> PROD₂(X, fact₁(p₁(X)))
ACTIVE₁(add₂(s₁(X), Y)) -> ADD₂(X, Y)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(prod₂(X1, X2)) -> PROD₂(proper₁(X1), proper₁(X2))
TOP₁(mark₁(X)) -> PROPER₁(X)
ACTIVE₁(fact₁(X)) -> FACT₁(active₁(X))
ADD₂(mark₁(X1), X2) -> ADD₂(X1, X2)
ACTIVE₁(fact₁(X)) -> P₁(X)
PROD₂(X1, mark₁(X2)) -> PROD₂(X1, X2)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
IF₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> IF₃(X1, X2, X3)
PROPER₁(add₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(add₂(X1, X2)) -> ADD₂(proper₁(X1), proper₁(X2))
PROPER₁(if₃(X1, X2, X3)) -> IF₃(proper₁(X1), proper₁(X2), proper₁(X3))
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(p₁(X)) -> P₁(proper₁(X))
ACTIVE₁(prod₂(X1, X2)) -> PROD₂(active₁(X1), X2)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(s₁(X)) -> S₁(proper₁(X))
FACT₁(ok₁(X)) -> FACT₁(X)
PROPER₁(fact₁(X)) -> FACT₁(proper₁(X))
S₁(ok₁(X)) -> S₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(prod₂(s₁(X), Y)) -> PROD₂(X, Y)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)
ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)
ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> S₁(0)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(fact₁(X)) -> IF₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X))))
PROPER₁(add₂(X1, X2)) -> PROPER₁(X2)
ACTIVE₁(p₁(X)) -> P₁(active₁(X))
ADD₂(X1, mark₁(X2)) -> ADD₂(X1, X2)
PROPER₁(zero₁(X)) -> ZERO₁(proper₁(X))
TOP₁(ok₁(X)) -> TOP₁(active₁(X))
ACTIVE₁(if₃(X1, X2, X3)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(prod₂(X1, X2)) -> PROD₂(X1, active₁(X2))
ACTIVE₁(fact₁(X)) -> ZERO₁(X)
ZERO₁(ok₁(X)) -> ZERO₁(X)
ACTIVE₁(add₂(s₁(X), Y)) -> S₁(add₂(X, Y))

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

Q DP problem:
The TRS P consists of the following rules:

P₁(mark₁(X)) -> P₁(X)
ACTIVE₁(zero₁(X)) -> ZERO₁(active₁(X))
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
S₁(mark₁(X)) -> S₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(if₃(X1, X2, X3)) -> IF₃(active₁(X1), X2, X3)
TOP₁(mark₁(X)) -> TOP₁(proper₁(X))
PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)
ZERO₁(mark₁(X)) -> ZERO₁(X)
IF₃(mark₁(X1), X2, X3) -> IF₃(X1, X2, X3)
PROD₂(ok₁(X1), ok₁(X2)) -> PROD₂(X1, X2)
ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X2)
FACT₁(mark₁(X)) -> FACT₁(X)
PROPER₁(zero₁(X)) -> PROPER₁(X)
P₁(ok₁(X)) -> P₁(X)
ACTIVE₁(add₂(X1, X2)) -> ADD₂(active₁(X1), X2)
ACTIVE₁(fact₁(X)) -> FACT₁(p₁(X))
TOP₁(ok₁(X)) -> ACTIVE₁(X)
ACTIVE₁(prod₂(s₁(X), Y)) -> ADD₂(Y, prod₂(X, Y))
ACTIVE₁(s₁(X)) -> S₁(active₁(X))
ACTIVE₁(add₂(X1, X2)) -> ADD₂(X1, active₁(X2))
PROPER₁(s₁(X)) -> PROPER₁(X)
ACTIVE₁(fact₁(X)) -> PROD₂(X, fact₁(p₁(X)))
ACTIVE₁(add₂(s₁(X), Y)) -> ADD₂(X, Y)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(prod₂(X1, X2)) -> PROD₂(proper₁(X1), proper₁(X2))
TOP₁(mark₁(X)) -> PROPER₁(X)
ACTIVE₁(fact₁(X)) -> FACT₁(active₁(X))
ADD₂(mark₁(X1), X2) -> ADD₂(X1, X2)
ACTIVE₁(fact₁(X)) -> P₁(X)
PROD₂(X1, mark₁(X2)) -> PROD₂(X1, X2)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
IF₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> IF₃(X1, X2, X3)
PROPER₁(add₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(add₂(X1, X2)) -> ADD₂(proper₁(X1), proper₁(X2))
PROPER₁(if₃(X1, X2, X3)) -> IF₃(proper₁(X1), proper₁(X2), proper₁(X3))
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(p₁(X)) -> P₁(proper₁(X))
ACTIVE₁(prod₂(X1, X2)) -> PROD₂(active₁(X1), X2)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(s₁(X)) -> S₁(proper₁(X))
FACT₁(ok₁(X)) -> FACT₁(X)
PROPER₁(fact₁(X)) -> FACT₁(proper₁(X))
S₁(ok₁(X)) -> S₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(prod₂(s₁(X), Y)) -> PROD₂(X, Y)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)
ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)
ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> S₁(0)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(fact₁(X)) -> IF₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X))))
PROPER₁(add₂(X1, X2)) -> PROPER₁(X2)
ACTIVE₁(p₁(X)) -> P₁(active₁(X))
ADD₂(X1, mark₁(X2)) -> ADD₂(X1, X2)
PROPER₁(zero₁(X)) -> ZERO₁(proper₁(X))
TOP₁(ok₁(X)) -> TOP₁(active₁(X))
ACTIVE₁(if₃(X1, X2, X3)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(prod₂(X1, X2)) -> PROD₂(X1, active₁(X2))
ACTIVE₁(fact₁(X)) -> ZERO₁(X)
ZERO₁(ok₁(X)) -> ZERO₁(X)
ACTIVE₁(add₂(s₁(X), Y)) -> S₁(add₂(X, Y))

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The approximation of the Dependency Graph [13,14,18] contains 10 SCCs with 28 less nodes.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADD₂(X1, mark₁(X2)) -> ADD₂(X1, X2)
ADD₂(mark₁(X1), X2) -> ADD₂(X1, X2)
ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ADD₂(X1, mark₁(X2)) -> ADD₂(X1, X2)

The remaining pairs can at least be oriented weakly.

ADD₂(mark₁(X1), X2) -> ADD₂(X1, X2)
ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ADD₂(x₁, x₂) ) = x₂

POL( mark₁(x₁) ) = x₁ + 1

POL( ok₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADD₂(mark₁(X1), X2) -> ADD₂(X1, X2)
ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ADD₂(mark₁(X1), X2) -> ADD₂(X1, X2)

The remaining pairs can at least be oriented weakly.

ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ADD₂(x₁, x₂) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

POL( ok₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ADD₂(ok₁(X1), ok₁(X2)) -> ADD₂(X1, X2)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ADD₂(x₁, x₂) ) = x₂

POL( ok₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P₁(mark₁(X)) -> P₁(X)
P₁(ok₁(X)) -> P₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

P₁(mark₁(X)) -> P₁(X)

The remaining pairs can at least be oriented weakly.

P₁(ok₁(X)) -> P₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( P₁(x₁) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

POL( ok₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

P₁(ok₁(X)) -> P₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

P₁(ok₁(X)) -> P₁(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( P₁(x₁) ) = x₁

POL( ok₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROD₂(ok₁(X1), ok₁(X2)) -> PROD₂(X1, X2)
PROD₂(X1, mark₁(X2)) -> PROD₂(X1, X2)
PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROD₂(ok₁(X1), ok₁(X2)) -> PROD₂(X1, X2)

The remaining pairs can at least be oriented weakly.

PROD₂(X1, mark₁(X2)) -> PROD₂(X1, X2)
PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROD₂(x₁, x₂) ) = x₂

POL( ok₁(x₁) ) = x₁ + 1

POL( mark₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROD₂(X1, mark₁(X2)) -> PROD₂(X1, X2)
PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROD₂(X1, mark₁(X2)) -> PROD₂(X1, X2)

The remaining pairs can at least be oriented weakly.

PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROD₂(x₁, x₂) ) = x₂

POL( mark₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROD₂(mark₁(X1), X2) -> PROD₂(X1, X2)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROD₂(x₁, x₂) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S₁(ok₁(X)) -> S₁(X)
S₁(mark₁(X)) -> S₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

S₁(ok₁(X)) -> S₁(X)

The remaining pairs can at least be oriented weakly.

S₁(mark₁(X)) -> S₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( S₁(x₁) ) = x₁

POL( ok₁(x₁) ) = x₁ + 1

POL( mark₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

S₁(mark₁(X)) -> S₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

S₁(mark₁(X)) -> S₁(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( S₁(x₁) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ZERO₁(mark₁(X)) -> ZERO₁(X)
ZERO₁(ok₁(X)) -> ZERO₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ZERO₁(mark₁(X)) -> ZERO₁(X)

The remaining pairs can at least be oriented weakly.

ZERO₁(ok₁(X)) -> ZERO₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ZERO₁(x₁) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

POL( ok₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ZERO₁(ok₁(X)) -> ZERO₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ZERO₁(ok₁(X)) -> ZERO₁(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ZERO₁(x₁) ) = x₁

POL( ok₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF₃(mark₁(X1), X2, X3) -> IF₃(X1, X2, X3)
IF₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> IF₃(X1, X2, X3)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

IF₃(mark₁(X1), X2, X3) -> IF₃(X1, X2, X3)

The remaining pairs can at least be oriented weakly.

IF₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> IF₃(X1, X2, X3)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( IF₃(x₁, ..., x₃) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

POL( ok₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

IF₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> IF₃(X1, X2, X3)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

IF₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> IF₃(X1, X2, X3)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( IF₃(x₁, ..., x₃) ) = x₃

POL( ok₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

FACT₁(mark₁(X)) -> FACT₁(X)
FACT₁(ok₁(X)) -> FACT₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

FACT₁(mark₁(X)) -> FACT₁(X)

The remaining pairs can at least be oriented weakly.

FACT₁(ok₁(X)) -> FACT₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( FACT₁(x₁) ) = x₁

POL( mark₁(x₁) ) = x₁ + 1

POL( ok₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

FACT₁(ok₁(X)) -> FACT₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

FACT₁(ok₁(X)) -> FACT₁(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( FACT₁(x₁) ) = x₁

POL( ok₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(add₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(zero₁(X)) -> PROPER₁(X)
PROPER₁(s₁(X)) -> PROPER₁(X)
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(add₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(add₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(add₂(X1, X2)) -> PROPER₁(X2)

The remaining pairs can at least be oriented weakly.

PROPER₁(zero₁(X)) -> PROPER₁(X)
PROPER₁(s₁(X)) -> PROPER₁(X)
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( add₂(x₁, x₂) ) = x₁ + x₂ + 1

POL( zero₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁

POL( fact₁(x₁) ) = x₁

POL( if₃(x₁, ..., x₃) ) = x₁ + x₂ + x₃

POL( prod₂(x₁, x₂) ) = x₁ + x₂

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(zero₁(X)) -> PROPER₁(X)
PROPER₁(s₁(X)) -> PROPER₁(X)
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)
PROPER₁(p₁(X)) -> PROPER₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(zero₁(X)) -> PROPER₁(X)

The remaining pairs can at least be oriented weakly.

PROPER₁(s₁(X)) -> PROPER₁(X)
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)
PROPER₁(p₁(X)) -> PROPER₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( zero₁(x₁) ) = x₁ + 1

POL( s₁(x₁) ) = x₁

POL( fact₁(x₁) ) = x₁

POL( if₃(x₁, ..., x₃) ) = x₁ + x₂ + x₃

POL( prod₂(x₁, x₂) ) = x₁ + x₂

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(s₁(X)) -> PROPER₁(X)
PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(s₁(X)) -> PROPER₁(X)

The remaining pairs can at least be oriented weakly.

PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁ + 1

POL( fact₁(x₁) ) = x₁

POL( if₃(x₁, ..., x₃) ) = x₁ + x₂ + x₃

POL( prod₂(x₁, x₂) ) = x₁ + x₂

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(fact₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)
PROPER₁(p₁(X)) -> PROPER₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(fact₁(X)) -> PROPER₁(X)

The remaining pairs can at least be oriented weakly.

PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)
PROPER₁(p₁(X)) -> PROPER₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( fact₁(x₁) ) = x₁ + 1

POL( if₃(x₁, ..., x₃) ) = x₁ + x₂ + x₃

POL( prod₂(x₁, x₂) ) = x₁ + x₂

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X3)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X1)
PROPER₁(if₃(X1, X2, X3)) -> PROPER₁(X2)

The remaining pairs can at least be oriented weakly.

PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(p₁(X)) -> PROPER₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( if₃(x₁, ..., x₃) ) = x₁ + x₂ + x₃ + 1

POL( prod₂(x₁, x₂) ) = x₁ + x₂

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)
PROPER₁(p₁(X)) -> PROPER₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(prod₂(X1, X2)) -> PROPER₁(X1)
PROPER₁(prod₂(X1, X2)) -> PROPER₁(X2)

The remaining pairs can at least be oriented weakly.

PROPER₁(p₁(X)) -> PROPER₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( prod₂(x₁, x₂) ) = x₁ + x₂ + 1

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ QDPOrderProof

                                  ↳ QDP

                                    ↳ QDPOrderProof

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

PROPER₁(p₁(X)) -> PROPER₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

PROPER₁(p₁(X)) -> PROPER₁(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( PROPER₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ QDPOrderProof

                                  ↳ QDP

                                    ↳ QDPOrderProof

                                      ↳ QDP

                                        ↳ PisEmptyProof

          ↳ QDP

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(if₃(X1, X2, X3)) -> ACTIVE₁(X1)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(prod₂(X1, X2)) -> ACTIVE₁(X1)

The remaining pairs can at least be oriented weakly.

ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(if₃(X1, X2, X3)) -> ACTIVE₁(X1)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( prod₂(x₁, x₂) ) = x₁ + x₂ + 1

POL( add₂(x₁, x₂) ) = x₁ + x₂

POL( fact₁(x₁) ) = x₁

POL( if₃(x₁, ..., x₃) ) = x₁

POL( zero₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(if₃(X1, X2, X3)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(if₃(X1, X2, X3)) -> ACTIVE₁(X1)

The remaining pairs can at least be oriented weakly.

ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( if₃(x₁, ..., x₃) ) = x₁ + 1

POL( fact₁(x₁) ) = x₁

POL( add₂(x₁, x₂) ) = x₁ + x₂

POL( zero₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X1)
ACTIVE₁(add₂(X1, X2)) -> ACTIVE₁(X2)

The remaining pairs can at least be oriented weakly.

ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( add₂(x₁, x₂) ) = x₁ + x₂ + 1

POL( fact₁(x₁) ) = x₁

POL( zero₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)
ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(fact₁(X)) -> ACTIVE₁(X)

The remaining pairs can at least be oriented weakly.

ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( fact₁(x₁) ) = x₁ + 1

POL( zero₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)
ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(zero₁(X)) -> ACTIVE₁(X)

The remaining pairs can at least be oriented weakly.

ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( zero₁(x₁) ) = x₁ + 1

POL( s₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(s₁(X)) -> ACTIVE₁(X)
ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(s₁(X)) -> ACTIVE₁(X)

The remaining pairs can at least be oriented weakly.

ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( s₁(x₁) ) = x₁ + 1

POL( p₁(x₁) ) = x₁

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ QDPOrderProof

                                  ↳ QDP

                                    ↳ QDPOrderProof

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
We use the reduction pair processor [13].

The following pairs can be oriented strictly and are deleted.

ACTIVE₁(p₁(X)) -> ACTIVE₁(X)

The remaining pairs can at least be oriented weakly.
none
Used ordering: Polynomial Order [17,21] with Interpretation:

POL( ACTIVE₁(x₁) ) = x₁

POL( p₁(x₁) ) = x₁ + 1

The following usable rules [14] were oriented: none

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

            ↳ QDPOrderProof

              ↳ QDP

                ↳ QDPOrderProof

                  ↳ QDP

                    ↳ QDPOrderProof

                      ↳ QDP

                        ↳ QDPOrderProof

                          ↳ QDP

                            ↳ QDPOrderProof

                              ↳ QDP

                                ↳ QDPOrderProof

                                  ↳ QDP

                                    ↳ QDPOrderProof

                                      ↳ QDP

                                        ↳ PisEmptyProof

          ↳ QDP

Q DP problem:
P is empty.
The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.
The TRS P is empty. Hence, there is no (P,Q,R) chain.

↳ QTRS

  ↳ DependencyPairsProof

    ↳ QDP

      ↳ DependencyGraphProof

        ↳ AND

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

          ↳ QDP

Q DP problem:
The TRS P consists of the following rules:

TOP₁(ok₁(X)) -> TOP₁(active₁(X))
TOP₁(mark₁(X)) -> TOP₁(proper₁(X))

The TRS R consists of the following rules:

active₁(fact₁(X)) -> mark₁(if₃(zero₁(X), s₁(0), prod₂(X, fact₁(p₁(X)))))
active₁(add₂(0, X)) -> mark₁(X)
active₁(add₂(s₁(X), Y)) -> mark₁(s₁(add₂(X, Y)))
active₁(prod₂(0, X)) -> mark₁(0)
active₁(prod₂(s₁(X), Y)) -> mark₁(add₂(Y, prod₂(X, Y)))
active₁(if₃(true, X, Y)) -> mark₁(X)
active₁(if₃(false, X, Y)) -> mark₁(Y)
active₁(zero₁(0)) -> mark₁(true)
active₁(zero₁(s₁(X))) -> mark₁(false)
active₁(p₁(s₁(X))) -> mark₁(X)
active₁(fact₁(X)) -> fact₁(active₁(X))
active₁(if₃(X1, X2, X3)) -> if₃(active₁(X1), X2, X3)
active₁(zero₁(X)) -> zero₁(active₁(X))
active₁(s₁(X)) -> s₁(active₁(X))
active₁(prod₂(X1, X2)) -> prod₂(active₁(X1), X2)
active₁(prod₂(X1, X2)) -> prod₂(X1, active₁(X2))
active₁(p₁(X)) -> p₁(active₁(X))
active₁(add₂(X1, X2)) -> add₂(active₁(X1), X2)
active₁(add₂(X1, X2)) -> add₂(X1, active₁(X2))
fact₁(mark₁(X)) -> mark₁(fact₁(X))
if₃(mark₁(X1), X2, X3) -> mark₁(if₃(X1, X2, X3))
zero₁(mark₁(X)) -> mark₁(zero₁(X))
s₁(mark₁(X)) -> mark₁(s₁(X))
prod₂(mark₁(X1), X2) -> mark₁(prod₂(X1, X2))
prod₂(X1, mark₁(X2)) -> mark₁(prod₂(X1, X2))
p₁(mark₁(X)) -> mark₁(p₁(X))
add₂(mark₁(X1), X2) -> mark₁(add₂(X1, X2))
add₂(X1, mark₁(X2)) -> mark₁(add₂(X1, X2))
proper₁(fact₁(X)) -> fact₁(proper₁(X))
proper₁(if₃(X1, X2, X3)) -> if₃(proper₁(X1), proper₁(X2), proper₁(X3))
proper₁(zero₁(X)) -> zero₁(proper₁(X))
proper₁(s₁(X)) -> s₁(proper₁(X))
proper₁(0) -> ok₁(0)
proper₁(prod₂(X1, X2)) -> prod₂(proper₁(X1), proper₁(X2))
proper₁(p₁(X)) -> p₁(proper₁(X))
proper₁(add₂(X1, X2)) -> add₂(proper₁(X1), proper₁(X2))
proper₁(true) -> ok₁(true)
proper₁(false) -> ok₁(false)
fact₁(ok₁(X)) -> ok₁(fact₁(X))
if₃(ok₁(X1), ok₁(X2), ok₁(X3)) -> ok₁(if₃(X1, X2, X3))
zero₁(ok₁(X)) -> ok₁(zero₁(X))
s₁(ok₁(X)) -> ok₁(s₁(X))
prod₂(ok₁(X1), ok₁(X2)) -> ok₁(prod₂(X1, X2))
p₁(ok₁(X)) -> ok₁(p₁(X))
add₂(ok₁(X1), ok₁(X2)) -> ok₁(add₂(X1, X2))
top₁(mark₁(X)) -> top₁(proper₁(X))
top₁(ok₁(X)) -> top₁(active₁(X))

Q is empty.
We have to consider all minimal (P,Q,R)-chains.